Grade 80 Lifting Swivel Eye Bolts

As a  safety precaution, Normal Eye Bolts are not recommended for Lifting at angles. Made from all steel construction the swivel lifting eye is a heavy duty lifting device which enables the user to safely lift units from horizontal to vertical and back again if required. Swivel Lifting Eyes are used where it is necessary to have full rotation of the loop Pivots 180 degrees and swivels 360 degrees simultaneously to allow lifting from any direction.

Rotates under load

Below are a few different configurations these rings can be used.

Other Name:
Bolt-On
Swivel Hoist Ring
Swivel Shackle
Grade 80 Rotating Eye Bolt

Grade 80 Lifting Swivel

Grade 80 Lifting Swivel Eye Bolts

G8 Lifting Swivel Diagram
VGD Grade 80 Imperial Lifting Swivel
G-80 Swivel Rings                      
Tape Size   WLL Dimensions Weight Product
      (lbs) (inches) lbs/pc Code
D     0 deg. 90 deg. A W B C E G T N    
1/4 20 1,213 606 2.057 1.107 1.428 0.677 0.512 2.109 1.770 0.54 0.90 297811613
5/16 18 1,323 661 2.076 1.130 1.427 0.694 0.512 2.078 1.727 0.55 0.92 297812013
3/8 16 1,984 1,102 2.089 1.134 1.424 0.643 0.709 2.076 1.767 0.56 0.95 297812418
7/16″ 14 2,205 1,102 2.078 1.158 1.428 0.645 0.709 2.102 1.722 0.55 0.96 297812818
1/2″ 13 2,205 1,102 2.068 1.155 1.420 0.680 0.787 2.116 1.824 0.55 0.98 297813220
5/8″ 11 4,409 2,469 2.066 1.130 1.423 0.648 0.787 2.139 1.705 0.54 1.05 297814020
3/4″ 10 8,818 4,409 2.756 1.378 1.949 0.748 1.181 2.677 2.205 0.63 2.11 297814830
7/8″ 9 11,023 5,512 2.756 1.378 1.949 0.748 1.181 2.677 2.205 0.63 2.45 297815630
1″ 8 13,889 6,945 3.363 1.575 2.374 0.866 1.181 3.202 2.727 0.71 3.11 297816430
1-1/4″ 7 26,015 17,637 4.541 1.969 3.159 1.063 1.969 4.344 3.554 0.87 8.00 297818050
G8 Swivels Metric Diag
VGD Grade 80 Metric Lifting Swivel
Tap Size Dimensions (mm) WLL at Lift Angle (tons) Weight (lbs/pc) Vanguard Code
A E W Ø 0 Deg. 90 Deg.
M8 55 13 30 13 0.60 0.30 0.92 2978 20813
M8 55 18 30 13 0.60 0.30 0.95 2978 20818
M10 55 18 30 13 0.90 0.45 0.96 2978 21018
M10 55 25 30 13 0.90 0.45 1.11 2978 21025
M12 55 20 30 13 1.00 0.50 1.11 2978 21220
M12 55 27 30 13 1.00 0.50 1.11 2978 21227
M16 55 24 30 13 2.00 1.12 1.11 2978 21624
M16 55 30 30 13 2.00 1.12 1.12 2978 21630
M16 55 35 30 13 2.00 1.12 1.15 2978 21635
M20 85 30 40 18 4.00 2.00 2.14 2978 22030
M20 85 43 40 18 4.00 2.00 2.20 2978 22043
M24 85 30 40 18 6.30 3.15 3.22 2978 22430
M24 85 38 40 18 6.30 3.15 3.27 2978 22438
M30 115 35 50 25 10.60 5.30 4.81 2978 23035
M30 115 50 50 25 11.80 8.00 8.30 2978 23050
M36 115 54 50 25 11.80 8.00 8.65 2978 23654

 WARNING: NEVER EXCEED WORKING LOAD LIMITS! 
                       WORKING LOAD LIMITS APPLY TO LIFTING ANGLES SPECIFIED ABOVE 
                       NEVER INSERT THE POINT OF A HOOK IN AN EYE BOLT.        
                       ALWAYS USE A SHACKLE!        
                       DO NOT USE LIFTING SWIVEL WHICH SHOWS OF WEAR OR DEFORMATION!

stats
for wordpress
Back to Top